다니엘 weree3 년간 사업상의 관계, 니켈 코발트 합금을 위한 훌륭한 파트너는 이었습니다!
캐롤라이나 Fasio정각 납품. 그리고 지원은 좋고 빠릅니다.
High temperature Inconel 718 plus hardened nickel-base alloy
|모델||인코넬 718Plus||동급 호칭||ATI 718Plus, 올바크 718Plus|
|Spec||AMS 5441, AMS 5442||아비아러블 형식||금은괴와 군인 숙사, 블록, 안출된 둥근 봉, 핫-롤드 모양과 사각형, 바, 로드, 와이어, 플레이트, 시트, 스트립과 캐스팅.|
High temperature Inconel 718 plus hardened nickel-base alloy for Copper-extruded mold
Inconel 718 Plus (UNSN 07818) is a new hardened nickel-base alloy, this alloy is designed to have excellent comprehensive mechanical properties, good heat processing and welding properties, and appropriate cost below 700°C . The launch of the 718plus alloy effectively fills the long-standing gap between the two most widely used High-temperature alloys Inconel 718 (650 °C) and Waspaloy (750 °C).
The Inconel 718 Plus was based on Inconel 718 to reduce the iron content by 18% to 10%, adding 9% cobalt and 1% tungsten, adjusting Al + Ti and Al/Ti, and appropriately increasing the niobium content, 718 Plus alloy overcomes the Insufficient requirements of the two alloy 718 and Waspaloy (GH4738),so that could be used and 700°C
718,718Plus,Waspaloy Chemical Composition comparison
These products have been typically used for parts requiring high resistance to creep and stress rupture up to 1400°F(760°C) and oxidation resistance up to 1800°F(982°C), but usage is not limited to such applications.
At present, the alloy The 718 Plus has been promoted and applied in several well-known aviation-engine companies, for plates, gates, fasteners, blades and so on.
The 718 Plus is also a commonly used material for copper extrusion mold.
718Plus alloy is available in all product forms: ingot, billet, block, forged round bar, hot-rolled shapes and rectangles, bar, rod, wire, plate, sheet, strip, and castings.